">

Quality Inspection Devices

Our measuring machines are used to check all dimensions of gears according to international standards and can measure with a precision of +/- 1 micron. These machines which are used in gear production, provide great benefits in the precise production of gears and their silent operation during applications. It carries out its measurements and controls according to international gear standards that comply with DIN, AGMA etc. and indicates which quality group it falls into according to these standards.

Sensitive

It can check and report all the features of any gear whose features are unknown. Precision and accurate diagnosis are important, especially in reverse engineering applications.

Multidirectional

Thanks to the sensitive operating feature of the machines, shafts, axles, cams, etc. with different geometries can also be controlled.

 

Large Scale

Almost all gear groups can be measured. The QC devices are capable of measuring straight, helical, worm, bevel gears and the attribute of cutters, etc. and report accordingly.

Industry 4.0 Compatible

Thanks to its "Closed Loop" feature, it can communicate with the production machine and send correction information to the machine according to the measurement result. This feature is compatible with industry 4.0.

P65

One of the several features of Klingelnberg P65 machine is its ability to reverse engineer. It has the ability to scan any profile and allow re-engineering using this data.

Likewise, according to the information given in the form of CAD data, it can measure, control and report on amorphous parts.

With the value added feature of adaptive equipment, it can measure surface roughness and determine its quality according to standards.

Due to its high precision operation, if the internal and external temperature difference exceeds 1 degree, it terminates measurement and control and takes measurements after balancing is achieved. The P65 machine was installed at PGR premise at the beginning of 2022 and has doubled the part control speed in production.

P40

The P40 machine can measure up to 400 mm in diameter. Thanks to the features in this machine, it can control Straight - helix - cutting tool - tapered (final drive) - Worm screw (yellow wheel) ZA, ZN, ZI, ZK & ZC and unknown gears.

Our measuring machines can work 24 hours a day. It is operated by our qualified and certified personnel who have been specially trained by Klingelnberg and increases the quality in production.